Rodem

Smart Sanitary Processes, Old-Fashioned Service

Call Us Now: 800-543-7312

Burkert Analysis

Ensure high-quality end products with clear, dependable analysis sensors and controllers from Burkert. 

Type 8222 Conductivity meter

The Bürkert compact meter Type 8222 is designed for measuring the conductivity of fluids. The conductivity meter consists of a sensor, plugged-in and pined to the transmitter (with removable display). The sensor comprises a cell with two electrodes and a Pt1000 temperature probe. The sensor itself is available with three different cell constants C, these with C=0.01 or 0.1 are fitted with stainless steel electrodes and those with C=1.0 are fitted with graphite electrodes. The conductivity meter can operate independent of the display but it will be required for programming the device and also for visualizing continuously the measured and processed data. The device Type 8222 is available: - with three fully programmable outputs: two transistor and one 2-wire 4...20 mA current outputs - with four fully programmable outputs: two transistor and two 3-wire 4...20 mA current outputs. The transmitter converts the measured signal, displays different values in different physical units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors.

  • Perfect for clean water and slightly concentrated liquids
  • Integral device for direct connection to PLC
  • Simulation of process values for diagnostics
  • Three cell constants to cover a wide application range e.g. reverse osmosis

Type 8202 pH/ORP meter

The Bürkert Type 8202 is a compact, but modular device, specially designed for measuring the pH or ORP value of fluids. Our device consists of a replaceable standard 120 mm pH or ORP probe, screwed in a sensor holder with integrated Pt1000 temperature sensor. This ensemble is plugged-in and screwed with a nut to an IP67 enclosure containing the electronic module with cover and a removable display. Bürkert expedites thus maintenance work. The pH/ORP transmitter can operate independent of the display, but it will be required for programming the device (i.e. selection of pH or ORP sensor type, measuring range, engineering units...) and also for visualizing continuously the measured and processed data. The device Type 8202 is available : - with three fully programmable outputs : two transistor and one 2-wire 4-20 mA current outputs - with four fully programmable outputs: two transistor and two 3-wire 4-20 mA current outputs The device Type 8202 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors.

  • Integral compact measurement device for direct connection to control level (PLC)
  • Thanks to the modular HMI, parameterization, calibration, transferring of parameterization data easily possible
  • Usage of 120 mm standard PG13,5 pH/ORP-probes with S8 connector (Type 8203 recommended)
  • Simulation of process value and diagnostic function

GET A QUOTE NOW

Speak with a Rodem representative to learn more about our analytical instruments today by completing our online form or calling us at 866-932-9787

See All Sanitary Analytical Instrumentation

We care about you. We want you to be profitable and productive.  That's why at Rodem, people are our biggest asset.

Helpful Recommendations to Improve System

"Service technician is prompt, does good work and has helped with recommendations to improve our systems."